I’ve had this on my list well over a year and with cold weather her it was time for me to tackle the job. It’s very quick and easy, but this video will serve as a guide to preparing you prior to the job. I ordered the...
Tag - land rover
Continued progress on the 1998 Land Rover Discovery 1 head gasket job! Major props to Caleb for getting this done for me! Below are some progress pictures.
Restoring these old Discovery 1’s is a journey. What started out as a bad wire between the wiring harness and the crank sensor led to a lot of other work. Turns out, the exhaust manifold stud is cracked and it’s best...
It’s with great honor to announce our Land Rover collection has been published in the 2019 holiday issue of Rovers Magazine! I work really hard to collect, restore, and maintain an array of Land Rovers (1998+) that I hope...
Building a Land Rover collection is fun and always has me on the lookout for deals. Recently, this Land Rover Discovery 2 popped up in White Hall, Maryland, not far from me. After a bit of back and forth, I got the seller down to...
As you know, I’m slowly building a small collection of Land Rovers with hopes my son and I can have a museum of sorts, years down the road, showcasing our “working collection” of Land Rovers. Recently I had an...
Here is another Rover for my collection, a 2003 Land Rover Range Rover. The problem, BMW engine with potential head gaskets blown. Good thing, I got it for free practically. I hope to get it running again and store as part of my...
With the success of the solar-powered battery tender trickle charger on the other Discovery, I had to install another panel and controller for the new 1998 Land Rover Discovery 1. Below is a quick video discussing it more...
Checking the oil in a 2016 Range Rover Sport Silly, right? Every time I checked the oil it said unavailable. Evidently, you must wait for a minimum of 20 minutes for it to read. I still prefer an old dipstick, but that...
Range Rover Classic license plate bracket installation I’ve been putting off installing a front plate for too long. In my state, Maryland, you are required to have one. Many of the solutions I found were a little bulky for...